Food Equipment Commercial Oven Repair Combi Oven Repair Dishwasher Repair Deep Fryer Repair Char Grill & Flat Top Repair All Food Equipment Services Refrigeration & Cool Rooms Cool Room Repair Gas Appliance Repair Electrical Repairs Air Conditioning Service Areas All Perth Metro & WA General News FAQ Who We Serve Why PEMS Existing Job Update Contact 📞 24/7 — 08 9554 3123 Book a Service 24/7
News & Case Studies

Commercial Kitchen Extraction Repair Currambine

06 March 2025  ·  Currambine

Book a Service← All News

A Currambine food production site was running a commercial oven that had quietly stopped exhausting properly. The extraction system had failed. With food production schedules running back-to-back, a non-functional exhaust is not a maintenance item to queue. It is a compliance and safety issue on a clock.

What Was Happening

The canopy fan had stopped working entirely. Without it, heat and vapour had nowhere to go. The oven could not operate safely in that condition. A replacement extraction assembly was sourced through Technobake. The parts cost was covered under warranty. What remained was the labour and the complexity of the installation. A canopy fan failure on a production oven is not something that can be worked around by opening a door. The exhaust carries heat, moisture, and combustion by-products away from the cooking space, and without it the area around the oven becomes unsafe for staff within a single bake cycle.

How It Was Handled

The oven was moved clear of the wall. The damaged exhaust system was fully removed and a new assembly installed and sealed. The installation required a custom wiring harness to be made on site. The oven was repositioned, tested, and confirmed operational before the technician left. Every stage was documented. Moving a production oven clear of the wall, fitting the new assembly, and returning it to position in one visit meant the kitchen lost a single production window rather than two.

The Result

The extraction system was fully replaced and the oven returned to service in a single visit. The operator received complete documentation of the fault, the parts replaced, and the verified outcome. No outstanding items were left open.

Why PEMS

The custom wiring harness was not a supplied part. It was fabricated on site to make the new assembly work correctly. That is the difference between a technician who completes the job and one who stops when the kit runs out.

If your site has ageing extraction or equipment that has not had a full service assessment recently, it is worth knowing what condition it is actually in before a failure decides the schedule for you. Contact PEMS on 08 9554 3123 or visit pemservices.com.au to book an assessment.

Equipment giving you grief?

PEMS provides specialist commercial food equipment repair across Perth and WA.

08 9554 3123Book Online
LinkedIn