Commercial Kitchen Oven Repair Inglewood | PEMS Perth

A commercial kitchen operator in Inglewood contacted PEMS in April 2026 after their Roastrunner Double chicken cooker began throwing a door switch fault on the left chamber. With a busy deli preparation area depending on the unit to keep up with demand, getting the oven back into service was a priority.

The Fault

The left chamber door switch on the Roastrunner Double chicken cooker had triggered a fault that prevented normal operation. Technician Philip traced the issue to door sensors that had shifted slightly out of alignment over time. While the fault code pointed to an electrical switch failure, the root cause was mechanical, a subtle misalignment that interrupted the door circuit.

The Repair

Philip tested the door sensor positions against the manufacturer's alignment tolerances, confirmed the deviation, and carefully readjusted both sensors to their correct positions. Following the adjustment, he ran multiple door cycle tests to verify consistent contact and reliable operation. The repair required no replacement parts and no electrical components were changed.

The Outcome

With the sensors realigned and tested, the Roastrunner Double returned to full operation across both chambers. The deli preparation area in Inglewood was back to normal production without further interruption to the commercial kitchen workflow.

Why PEMS

PEMS technicians carry out thorough diagnostic testing before replacing any parts. That discipline identified a mechanical alignment issue rather than an electrical fault, keeping repair costs low and avoiding unnecessary component replacement.

If your commercial kitchen equipment in Perth is showing fault codes or performance issues, call PEMS on 08 7095 3550 or visit pemservices.com.au to log a job. The team services commercial kitchen equipment across Inglewood and throughout the greater Perth metro area.

---