Commercial Kitchen Control Board Repair | Beaconsfield Perth

A commercial kitchen equipment failure at Il Panino Bakery, 115 Lefroy Road, Beaconsfield brought production to a halt in April 2026. With a busy bakery operation depending on consistent equipment performance, getting the machinery back online was critical to keeping the kitchen running and stock moving.

The Fault

The control board on a key piece of commercial kitchen equipment had failed completely. The situation was complicated further when it emerged that the original supplier had never provided the full parameter data required to configure a replacement board. Without that information, a straightforward swap-out became a significantly more technical repair job.

The Repair

PEMS technician A. Barltrop attended site, carefully removed the faulty control board, and recorded and marked all wiring before installing the replacement unit. He rewired and bridged connections according to the supplied replacement manual and configured the initial parameters. Because the store was closing, full verification was deferred. Technician R. McGivern returned the following day, reconnected the board, and programmed each parameter individually, working through the configuration from scratch given the missing supplier data.

The Outcome

With every parameter correctly programmed, the equipment was restored to full operation. Il Panino Bakery could resume normal production without further interruption, and the kitchen had a fully documented wiring record for future reference.

Why PEMS

When supplier support falls short, PEMS technicians work through the problem systematically rather than walking away. That methodical approach turned an incomplete handover from a supplier into a fully resolved repair for this Beaconsfield bakery.

Contact PEMS for commercial kitchen equipment repair across Perth. Call **08 7095 3550** or visit **pemservices.com.au** to book a technician for your business.

---